The whole prosedure is in the thread curently active in the Crash Box section. What to grab for a T-5 swap. Bowtie tim gives part numbers for the clutch disc or if you have a clutch shop nearby they can make one up. If you have an automatic you already have a crossmember at the rear of the trans. You can get a universal one or fabricate one. Some guys run without one like the original cast iron trans. but I sure wouln't with that long thin alum. one.


They say money can't buy happiness. It can buy old Chevy trucks though. Same thing.
1972 Chevy c10 Cheyenne Super
In the Gallery Forum