| |
Click on image for the lowdown. 
====
| | |
1 members (moparguy),
39
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,089 Posts1,056,004 Members48,430 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jan 2008 Posts: 4,961 'Bolter | | 'Bolter Joined: Jan 2008 Posts: 4,961 | I'm not sure what you are trying to do. Are you trying to remove the yoke from the pinion shaft? If that's what you are trying to do, I would hang the whole thing from a bearing splitter and put it in a hydraulic press. I put a nut on the threads flush with the end of the pinion shaft to prevent mushrooming the end. They can be pretty tough after 70 years of rust. | | |
|
|
| |
