| |
Click on image for the lowdown. 
====
| | |
8 members (JW51, Woodcmiami, Gdads51, dt235sd, MickeyP, HandyAndy, k2handyman, 1 invisible),
58
guests, and
1
robot. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,049 Posts1,055,699 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Mar 2007 Posts: 30 Apprentice | | Apprentice Joined: Mar 2007 Posts: 30 | It can be done with a lap joint but I never use them. I only put lap welds were the factory had them originally. You can not do really good metal finishing with a lap welded patch panel. You have to use filler and I try to use as little filler as possible. Butt welding is the best way, but a lap weld will work.
Last edited by mkabwe; 01/07/2011 1:57 AM.
| | | |
Entire Thread
|  
'59 Apache - Inner/outer cab corners, first time
| Barsteel | 01/05/2011 12:26 AM | |
Re: '59 Apache - Inner/outer cab corners, first time
| truckernix | 01/05/2011 1:22 AM | |
Re: '59 Apache - Inner/outer cab corners, first time
| Yakimabowtie | 01/05/2011 10:44 PM | |
Re: '59 Apache - Inner/outer cab corners, first time
| mkabwe | 01/05/2011 11:47 PM | |
Re: '59 Apache - Inner/outer cab corners, first time
| truckernix | 01/06/2011 1:36 AM | |
Re: '59 Apache - Inner/outer cab corners, first time
| niobrarafun | 01/06/2011 3:09 AM | |
Re: '59 Apache - Inner/outer cab corners, first time
| jfnar | 01/06/2011 11:31 PM | |
Re: '59 Apache - Inner/outer cab corners, first time
| mkabwe | 01/07/2011 1:29 AM | |
Re: '59 Apache - Inner/outer cab corners, first time
| Barsteel | 01/07/2011 1:52 AM | |
Re: '59 Apache - Inner/outer cab corners, first time
| Brad Allen | 01/07/2011 3:18 AM | |
Re: '59 Apache - Inner/outer cab corners, first time
| Barsteel | 01/07/2011 4:52 PM | |
|
|
| |
