| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,047 Posts1,055,621 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: May 2004 Posts: 1,312 'Bolter | | 'Bolter Joined: May 2004 Posts: 1,312 | You might want to have a look at Mar K's info site. They have a lot of info. on bed wood & strips.
Going from memory ( truck is at home ), curved portions sit above wood face approx. 1/8". Strips are about 1 1/4" wide, with center flat area about 1" wide. Outer edges sit pretty well level with underside of bolt surface. Outer edge of wood plank is slightly recessed which allows bed strip to sit lower, and also lets edge of strip fit into groove on plank. | | |
|
|
| |
