| |
Click on image for the lowdown. 
====
| | |
8 members (Perro, Hush, Lightholder's Dad, John L., Otto Skorzeny, lumbersawyer, FAST55, Hanks custodian),
182
guests, and
6
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,075 Posts1,056,007 Members48,433 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#68736 11/16/2006 5:35 PM | Joined: Aug 2005 Posts: 6,377 Ex Hall Monitor | | Ex Hall Monitor Joined: Aug 2005 Posts: 6,377 | I had to remove the frame crossmember & flywheel cover to get mine off (38 216). When you go back on with the pan use two or three 1 1/2" bolts with the heads cut off to help with the alignment. Use bolts the same size & thread as the stove bolts holding the pan on. Put one or two finger tight on each side of the pan. Use these as alignment guides to position the pan. Put the rest of the fasteners in but not tight. Remove the alignment bolts, install the fasteners in those holes and tighten all. Good luck.
Save a life, adopt a senior shelter pet.
The three main causes of blindness: Cataracts, Politics, Religion.
Name your dog Naked so you can walk Naked in the park.
| | |
|
|
| |
