| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,090 Posts1,056,022 Members48,430 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: May 2010 Posts: 144 Wrench Fetcher | | Wrench Fetcher Joined: May 2010 Posts: 144 | I have read John Sandoval's tech tip on the T-5 installation on the Stovebolt forum.
I bought a ’53 3600 ¾ ton and had Troy Robertson install a rebuilt 235 and World Class T-5 from Tom Langdon, from an ’86 Camaro and had an S-10 shifter put on it. I used the WC T-5 to get the .63 overdrive to work with my existing 4.56 rear end in order to get 64 mph at 2200 rpm. Everything works great with one small exception. I have a rattling sound when ever I depress the clutch. I have a good custom clutch shop near where I live but they only repair the clutches but do not remove them from the vehicle.
I have two floor jacks, one motorcycle lift and 4 good jack stands and woodworking shop.
My question is in order to remove the clutch, how do you support the T-5 to move it back from the bell housing and in again to bolt it up? I can do the wrenching but am just too old to lift the T-5 by myself and insert the bolts.
Any help is appreciated.
Thanks
John Hill
| | |
|
|
| |
