Thanks for the compliments guys....sorry I put a C30 in your ton and a half section I didn't notice till after i screwed up ...I'll delete it if necessary

Bill,
To answer your question about the bed...that was the most frustrating and took the most hrs. of all the build

-The outer bed rails are Chevy which were shortened to 8ft. and narrowed to approx 6ft.6"

-the original wood frame structure was replaced by channel iron covered w/diamond plate on the sides to cover the gaps

-the top of the bed is cdx 3/4 ply sealed w/oil base primer and paint...and the overlay is oak ply 1/4 inch w/diamond plate divider strips.