| |
Click on image for the lowdown. 
====
| | |
7 members (moparguy, Oswald, 1955 1 Series, Southerntruck, Otto Skorzeny, Millenimech, 1 invisible),
78
guests, and
0
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,154 Posts1,056,834 Members48,456 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#66741 10/03/2006 2:45 AM | Joined: Sep 2006 Posts: 8 Wrench Fetcher | | Wrench Fetcher Joined: Sep 2006 Posts: 8 | I'm new to this forum and my truck. I have a '54 3100. It has a three speed mounted to the torque tube. I acquired a four speed which could be a '54 or a '49. It came out of a '49, but there was a '54 235 in that truck so I am not sure of the year of the trans. Question is, can I mount the four speed to the torque tube in my '54 without modification of the driveshaft/torque tube? Do these transmissions swap easily? The splines on the input shaft are the same, I just need to know if it will bolt up before I drop the engine/trans assembly into the truck.
Andy | | |
|
|
| |
