| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,049 Posts1,055,682 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Mar 2004 Posts: 62 'Bolter | | 'Bolter Joined: Mar 2004 Posts: 62 | I'm reassembling my aluminum '62 powerglide for a 6 cyl, it's the original and hadn't been apart before.
I can't get the clearance for the reverse clutch pack (right now there's a 3/16" gap and it should be .016-.040")
My trans came with a select reverse pacer plate with no Bellville spring or wave washer... I'm wondering if the gap is normal for this situation (or should the spacer should be thicker, or find a spring / wave washer...)
Thanks for any advice,
Matt | | |
|
|
| |
