| |
Click on image for the lowdown. 
====
|
| | Forums66 Topics128,050 Posts1,055,753 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
|
| THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
|
| | | Joined: May 2007 Posts: 41 Wrench Fetcher | | Wrench Fetcher Joined: May 2007 Posts: 41 | Could be. There are 2 types that I know of. The thin ones that I associate with early engines and the tube type ones that I've seen on later emgines. They are the same length, the only difference is in the size of the cup at the top that the adjuster screw fits into. These are different from each other. That being said if you take hime 2 push rods and 2 nuts and screws from your rockers everything should interchange and work just fine. You don't want to use the wrong adjusters on the wrong push rods, the rods will break fairly soon. Don't ask me how I know.
54Monster | | |
|
|
| |
