Here is a picture of the bell housing jacked-up off the cross member.
bell_housing The right side had this mount and a rattling bolt not even close to being tight and the left side had nothing except a tight bolt; no rubber at all. I'm thinking Patrick's might have a mount like this. Any other suggestions?
mount Here is the left-side of the housing. It was just bolted to the cross member.
left Here is the right-side. It had the rubber and metal u-shaped mount but the bolt was not close to being tight.
right Here is the disc and plate I pulled out.
clutch Here is a picture of the still-mounted flywheel. Does that look like a crack?
flywheel The bell housing would move back and forth pretty easily when I was wiggling the transmission out.
