Hi Guys,
I need your detailed pictures. I just opened a big box of stuff I bought from Jim Carter's last August and I don't know how to install anything. I've got a little bag of (6 or 8) hood rubber bumpers but no idea where they go? I don't see existing holes that look right; there ARE 3 or 4 round depressions on the cowl line - some have holes, some do not. The holes it does have are too small for the rubber protrusions to go into, I don't want to drill them larger til I consult you guys.
Also - the rubber for the hood to cowl junction; its basically a long rectangular rubber extrusion with a line or raise ride down the middle. I think that the raised ridge line goes IN the cowl line, does that sound right? Seems logical, but it also seems the square metal hold downs w/ counter sunk hole would hit the hood paint(?) If I screw them in hard enough will the rubber bulge and keep this from happening? So if I do this, the rubber snubbers interrupt the continuous line of rubber?
After these questions, I've got a whole other group about installing window felt, a tacky 1" or 1-1/2" "tape" that I think may be for setting window glass in the metal window frame that goes up & down?
Any and all pictures and explanations will be VERY appreciated.
