The Stovebolt Site Forums The Shop Area Engine Shop Ring and pinion for 49 3600

Brrrr

Winter is Coming
Time to think about winterizing your Bolt.
Shaffer's 1950 ranch truck used ALL year

A good Tech Tip
WINTERIZING YOUR TRUCK
including a link back to the Forums for additional tips.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

1 members (klhansen), 136 guests, and 10 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,281

Posts1,058,470

Members48,490

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: Ring and pinion for 49 3600 Yelostn78 #614636 01/29/2010 4:36 AM
Joined: May 2006 Posts: 8,351 DANVILLE IL L LONGBOX55 'Bolter
LONGBOX55 'Bolter L Joined: May 2006 Posts: 8,351 DANVILLE IL	The model would be C20 or K20. The 3rd member is a direct interchange, the '4.10 ratio was used '68-'72 om 3/4 ton. No need to swap the ring and pinion, as the entire 3rd member bolts right in. Bill Burmeister

Entire Thread
Subject	Posted By	Posted
Ring and pinion for 49 3600	Yelostn78	01/29/2010 3:37 AM
Re: Ring and pinion for 49 3600	LONGBOX55	01/29/2010 4:36 AM
Re: Ring and pinion for 49 3600	Yelostn78	01/29/2010 4:49 AM
Re: Ring and pinion for 49 3600	OldSub	01/29/2010 5:53 AM
Re: Ring and pinion for 49 3600	Denny Graham	01/29/2010 12:57 PM
Re: Ring and pinion for 49 3600	truckernix	01/29/2010 1:16 PM
Re: Ring and pinion for 49 3600	Ghostrider	01/29/2010 3:34 PM
Re: Ring and pinion for 49 3600	Uncle Wes	01/29/2010 4:13 PM
Re: Ring and pinion for 49 3600	Denny Graham	01/29/2010 6:51 PM
Re: Ring and pinion for 49 3600	Ghostrider	01/29/2010 7:01 PM
Re: Ring and pinion for 49 3600	Yelostn78	01/29/2010 11:48 PM
Re: Ring and pinion for 49 3600	truckernix	01/30/2010 12:54 AM
Re: Ring and pinion for 49 3600	Denny Graham	01/30/2010 2:02 AM
Re: Ring and pinion for 49 3600	Yelostn78	02/01/2010 1:11 AM
Re: Ring and pinion for 49 3600	Denny Graham	02/01/2010 5:09 AM
Re: Ring and pinion for 49 3600	OldSub	02/01/2010 5:40 AM
Re: Ring and pinion for 49 3600	Denny Graham	02/01/2010 1:50 PM
Re: Ring and pinion for 49 3600	OldSub	02/01/2010 5:44 PM
Re: Ring and pinion for 49 3600	Yelostn78	02/25/2010 2:21 AM
Re: Ring and pinion for 49 3600	truckernix	02/25/2010 3:51 AM
Re: Ring and pinion for 49 3600	OldSub	02/25/2010 4:31 AM
Re: Ring and pinion for 49 3600	Yelostn78	02/25/2010 4:49 AM
Re: Ring and pinion for 49 3600	Uncle Wes	04/05/2010 5:16 PM
Re: Ring and pinion for 49 3600	grossie73	09/28/2017 6:52 PM
Re: Ring and pinion for 49 3600	moparguy	09/29/2017 1:15 AM

Moderated by Phak1, Woogeroo

Hop To

Link Copied to Clipboard