| |
Click on image for the lowdown. 
====
| | |
1 members (RLB),
116
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,090 Posts1,056,378 Members48,442 | | Most Online14,466 Apr 26th, 2026 | | AD Chevy Trucks Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down with Ads! Again, thanks! | | | | Joined: Feb 2004 Posts: 29,826 Kettle Custodian (pot stirrer) | | Kettle Custodian (pot stirrer) Joined: Feb 2004 Posts: 29,826 | I've measured the resistance of hundreds of HEI coil primary windings. They average around 1/2 Ohm. 14 volts (charging system voltage) divided by 1/2 Ohm, according to Ohm's Law works out to 28 amps. Until the inductive reactance of the coil primary kicks in partway through the coil saturation cycle, there will be a very high primary current. Watching the primary pattern on an oscilloscope is pretty informative, with a heavy current surge early in the coil saturation waveform. Bigger is better on the hot wire to the coil. Jerry
"It is better to be silent and be thought a fool than to speak and eliminate all doubt!" - Abraham Lincoln Cringe and wail in fear, Eloi- - - - -we Morlocks are on the hunt! There is nothing noble in being superior to your fellow man; true nobility is being superior to your former self. - Ernest Hemingway Love your enemies and drive 'em nuts!
| | | |
Entire Thread
|
235 fitted with HEI, how to wire?
| Taff | 01/24/2010 6:31 PM |
Re: 235 fitted with HEI, how to wire?
| Hotrod Lincoln | 01/24/2010 9:30 PM |
Re: 235 fitted with HEI, how to wire?
| Taff | 01/24/2010 10:58 PM |
Re: 235 fitted with HEI, how to wire?
| Hotrod Lincoln | 01/25/2010 12:48 AM |
Re: 235 fitted with HEI, how to wire?
| Richard | 01/25/2010 5:23 AM |
Re: 235 fitted with HEI, how to wire?
| Hotrod Lincoln | 01/25/2010 7:30 AM |
Re: 235 fitted with HEI, how to wire?
| Richard | 01/25/2010 9:13 AM |
Re: 235 fitted with HEI, how to wire?
| Hotrod Lincoln | 01/25/2010 2:00 PM |
Re: 235 fitted with HEI, how to wire?
| LGriffin | 01/25/2010 2:08 PM |
Re: 235 fitted with HEI, how to wire?
| Taff | 01/31/2010 4:56 PM |
Re: 235 fitted with HEI, how to wire?
| Virginiafiretruck | 02/18/2010 3:39 AM | |
| |
| |