The Stovebolt Site Forums The Shop Area Engine Shop '53 3600 clutch - New Problem!

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

6 members (delwrench, FAST55, RaNfLaS, rfs56trk, Rusted Nut, mick53), 240 guests, and 3 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,086

Posts1,056,101

Members48,434

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: '53 3600 clutch Ferndale53 #613047 01/24/2010 9:48 PM
Joined: Nov 2005 Posts: 6,100 B. C. Canada 3 3B 'Bolter
3B 'Bolter 3 Joined: Nov 2005 Posts: 6,100 B. C. Canada	Hy Ferndale53, if you are going to use the 53 flywheel and keep your six volt starter, then I would use the 11" clutch, personally I don't believe you can use too large a clutch, as long as it will fit in the bellhousing you are using.

Entire Thread
Subject	Posted By	Posted
'53 3600 clutch - New Problem!	Ferndale53	01/24/2010 8:24 PM
Re: '53 3600 clutch	3B	01/24/2010 9:48 PM
Re: '53 3600 clutch	Ferndale53	01/25/2010 9:10 PM
Re: '53 3600 clutch	Ghostrider	01/25/2010 9:37 PM
Re: '53 3600 clutch	Ferndale53	01/27/2010 5:02 PM
Re: '53 3600 clutch	Ghostrider	01/27/2010 7:44 PM
Re: '53 3600 clutch	Ferndale53	01/27/2010 8:03 PM
Re: '53 3600 clutch	Wrenchbender Ret.	01/27/2010 8:28 PM
Re: '53 3600 clutch	Ferndale53	01/27/2010 8:35 PM
Re: '53 3600 clutch	Wrenchbender Ret.	01/27/2010 11:47 PM
Re: '53 3600 clutch	Ferndale53	02/03/2010 4:14 PM
Re: '53 3600 clutch	Denny Graham	02/03/2010 7:58 PM
Re: '53 3600 clutch	Ferndale53	02/03/2010 8:02 PM
Re: '53 3600 clutch	Denny Graham	02/03/2010 8:40 PM
Re: '53 3600 clutch	Ferndale53	02/03/2010 8:48 PM
Re: '53 3600 clutch	Ferndale53	02/11/2010 8:48 PM
Re: '53 3600 clutch	squarenutz	01/25/2010 9:58 PM
Re: '53 3600 clutch	Wrenchbender Ret.	01/25/2010 11:33 PM
Re: '53 3600 clutch	squarenutz	01/25/2010 11:52 PM
Re: '53 3600 clutch	Wrenchbender Ret.	01/26/2010 12:25 AM
Re: '53 3600 clutch	Monica B	02/16/2010 4:03 AM
Re: '53 3600 clutch	Ferndale53	02/23/2010 9:23 PM
Re: '53 3600 clutch	Ferndale53	02/26/2010 2:08 AM
Re: '53 3600 clutch	Hotrod Lincoln	02/26/2010 2:23 AM
Re: '53 3600 clutch	Ferndale53	02/26/2010 2:34 AM

Moderated by Phak1, Woogeroo

Hop To

Link Copied to Clipboard