| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,088 Posts1,055,998 Members48,430 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jan 2008 Posts: 69 Wrench Fetcher | | Wrench Fetcher Joined: Jan 2008 Posts: 69 | What are you putting it in? If you need the two mounts under the bell housing then you should be able to use a 235 housing for a 55-59 truck. The 235 car housing is mechanical also but does not have the mounts. The 402 clutch may work, but I don't think the flywheel will work. As I recall the 235 has the timing marks on the back of the flywheel. Hope that helps.
TruckNut
Be kind, courteous, cheerful and helpful - And someone will take advantage of you.
"Quiting smoking is easy, I've done it hundreds of times." Mark Twain
| | |
|
|
| |
