The one you say turned is the thrust bearing, thats the two lips on the side of the bearing. That engine is probably just seized up from sitting with the pan off... even sitting with the pan on and in a shed sometimes they will seize sitting that long, or was it seized when it was parked did you say..?? regardless it doesnt look like it turned, the top half of the block on the main bearing has like a pin dowel that goes down to hold the bearing in place, kinda rare to turn a main bearing on one of those... if you want to save it.. just tear it down and take to machine shop and have them look at it,, they will tell you if it needs bored and crank turned. The main bearings can be shimmed also. easiest way is to let the machine shop check it after its tore down... id almost bet some of the rings are seized also....or other rod caps even...yeah now i see ya say it was parked locked up....just guessing from just rust on the thrust bearing,,tells me it got hot, cause it appears maybe it rusted more than the others? if it was hot,, was probably oil problem , but it dont look like it turned,, anyway like i say tear it down and have it checked, if the crank isnt scored it can be polished or turned. the bores need checked anyway sitting that long.....