| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,091 Posts1,056,036 Members48,433 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jan 2009 Posts: 1,644 Shop Shark | | Shop Shark Joined: Jan 2009 Posts: 1,644 | I made a spacer bar out of a peice of 1 1/2 x 1 1/2 angle iron by drilling two holes and bolted the chains to it with two 3/8s bolts thru the chains also I used two eye bolts that I got at ace hardware the same size as Your head bolts they are rated at 2200 lbs each and only cost 8.00 , You just take out I think the 4th and 8th head bolts from the front to balance the engine, and screw the two eye bolts in there place it is very safe .drill the two holes in the spacer bar the same as the spacing on the two eye bolts and out it will go .
Pete | | |
|
|
| |
