My 1946 GMC 1/2ton cmae to me with a Chevy 235 with a 4 speed Munsie SM420. The passenger side of the trans has the cast in mounts for the parking brake, but the drivers side has a mickey mouse welded to the bell housing bracket for mounting the brake/clutch assembly. I'd like to tidy up and get it back - or closer to original. Does anyone have a picture or illustration of how this originally went together. Has anyone dealt with this before? Was the assembly originally bolted to both the bellhousing and the trans? I was thinking about fabricating some brackets and/or finding an older bell housing. Any thoughts would be appreciated.
