The Stovebolt Site Forums The Shop Area The Tool Chest Gas or MIG?

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

0 members (), 116 guests, and 2 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,080

Posts1,055,954

Members48,430

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: Gas or MIG? atomarc #527144 04/11/2009 4:41 AM
Joined: Oct 2001 Posts: 578 Tacoma, WA J Jim Bow 'Bolter
Jim Bow 'Bolter J Joined: Oct 2001 Posts: 578 Tacoma, WA	No, he's very experienced. This was only the second class. First class was all safety related plus a tour of the facility. Today was Oxy-Fuel. Next week is MIG Then stick then Tig Then gas and plasma cutting Then two months of hands on project work with one-on-one coaching. "Happiness equals reality minus expectations" - Tom Magliozzi

Entire Thread
Subject	Posted By	Posted
Gas or MIG?	Jim Bow	04/11/2009 3:16 AM
Re: Gas or MIG?	Flxible	04/11/2009 3:29 AM
Re: Gas or MIG?	atomarc	04/11/2009 4:34 AM
Re: Gas or MIG?	Jim Bow	04/11/2009 4:41 AM
Re: Gas or MIG?	atomarc	04/11/2009 4:46 AM
Re: Gas or MIG?	hoggyrubber	04/11/2009 7:30 AM
Re: Gas or MIG?	bob308	04/11/2009 3:42 PM
Re: Gas or MIG?	crenwelge	04/11/2009 6:56 PM
Re: Gas or MIG?	dale937	04/18/2009 12:43 PM
Re: Gas or MIG?	PapaJ	04/19/2009 7:11 PM

Moderated by MNSmith

Hop To

Link Copied to Clipboard