| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,211 Posts1,057,468 Members48,471 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jun 2004 Posts: 8,597 Riding in the Passing Lane | | Riding in the Passing Lane Joined: Jun 2004 Posts: 8,597 | I think TC thought you ment rear engine seal. To replace the trans. rear seal you pull the drive shaft out & remove the seal. If the seal has a flange on it you put a chisel in back of it & tap it out. If not take a small chisel & hammer & dig into it. If you have a large socket about the size of the seal you can use it to hammer in the new seal. If not tap it carefully on the edge work ing around till it is flush with the houseing. A new seal is available from any parts store.
They say money can't buy happiness. It can buy old Chevy trucks though. Same thing. 1972 Chevy c10 Cheyenne SuperIn the Gallery Forum | | |
|
|
| |
