| |
Click on image for the lowdown. 
====
|
| | Forums66 Topics128,051 Posts1,055,767 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
|
| THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
|
| | | Joined: Feb 2006 Posts: 564 Shop Shark | | Shop Shark Joined: Feb 2006 Posts: 564 | Are you wiping out the same lobe on the cams?
It's possible your valves are sticking in the guides. It's also possible you've got the wrong valve springs, the springs have too much pressure because the spring seats are too high, or your pushrods are too long and you've got too much pre-load on the valves.
If you've wiped out four cams, something in the valve train is wrong.
-Brad
SOUTHERN FALL GABfestOctober 6 ~ Commerce, Georgia Details here!Never Pee on an Electric Fence. | | |
|
|
| |
