The Stovebolt Site Forums The Shop Area Engine Shop '54 3/4 ton pinion nut and yoke

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

4 members (TUTS 59, dt235sd, cmayna, 1 invisible), 70 guests, and 4 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,176

Posts1,057,122

Members48,463

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: '54 3/4 ton pinion nut and yoke truckernix #515871 03/11/2009 6:17 PM
Joined: Mar 2009 Posts: 124 plymouth, ca M monkey wrench 'Bolter
monkey wrench 'Bolter M Joined: Mar 2009 Posts: 124 plymouth, ca	i have the pumkin out. i'll check for play at the yoke. how much play suggests i should replace the bearings? good info on the sleeve and bearing options. thanks 54 3/4 ton http://www5.snapfish.com/comcast/th...=SHR/otsi=SALBlink/COBRAND_NAME=comcast/

Entire Thread
Subject	Posted By	Posted
'54 3/4 ton pinion nut and yoke	monkey wrench	03/10/2009 4:01 AM
Re: '54 3/4 ton pinion nut and yoke	Denny Graham	03/10/2009 12:06 PM
Re: '54 3/4 ton pinion nut and yoke	truckernix	03/10/2009 12:11 PM
Re: '54 3/4 ton pinion nut and yoke	monkey wrench	03/11/2009 3:14 AM
Re: '54 3/4 ton pinion nut and yoke	truckernix	03/11/2009 12:16 PM
Re: '54 3/4 ton pinion nut and yoke	monkey wrench	03/11/2009 6:17 PM
Re: '54 3/4 ton pinion nut and yoke	truckernix	03/11/2009 10:18 PM
Re: '54 3/4 ton pinion nut and yoke	Wrenchbender Ret.	03/11/2009 11:21 PM
Re: '54 3/4 ton pinion nut and yoke	monkey wrench	03/12/2009 4:10 AM
Re: '54 3/4 ton pinion nut and yoke	Wrenchbender Ret.	03/12/2009 9:06 PM
Re: '54 3/4 ton pinion nut and yoke	monkey wrench	03/14/2009 2:23 AM
Re: '54 3/4 ton pinion nut and yoke	truckernix	03/14/2009 12:18 PM

Moderated by Phak1, Woogeroo

Hop To

Link Copied to Clipboard