The Stovebolt Site Forums The Shop Area Paint and Body Shop When replacing the sheetmetal with new sheetmetal

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

4 members (Wayne67vert, Otto Skorzeny, Samantha, MNSmith), 43 guests, and 1 robot.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,154

Posts1,056,850

Members48,456

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: When replacing the sheetmetal with new sheetmetal SW_Radial #504879 02/11/2009 8:31 PM
Joined: Nov 2002 Posts: 48 richland, washington Z zachscc Wrench Fetcher
zachscc Wrench Fetcher Z Joined: Nov 2002 Posts: 48 richland, washington	Use a peice of copper to back up the weld. Do a yahoo search on body sheet metal welding!. You NEED gas and thin thin wire! If you need a tool and don't buy it, you will find you have paid for it and don't have it.

Entire Thread
Subject	Posted By	Posted
When replacing the sheetmetal with new sheetmetal	calhere	02/11/2009 1:35 PM
Re: When replacing the sheetmetal with new sheetmetal	SW_Radial	02/11/2009 2:22 PM
Re: When replacing the sheetmetal with new sheetmetal	zachscc	02/11/2009 8:31 PM
Re: When replacing the sheetmetal with new sheetmetal	Curt B.	02/11/2009 10:23 PM
Re: When replacing the sheetmetal with new sheetmetal	calhere	02/11/2009 10:30 PM
Re: When replacing the sheetmetal with new sheetmetal	Daniel Bland	02/12/2009 12:15 AM
Re: When replacing the sheetmetal with new sheetmetal	Alan's 57	02/12/2009 12:42 AM
Re: When replacing the sheetmetal with new sheetmetal	calhere	02/12/2009 12:52 AM
Re: When replacing the sheetmetal with new sheetmetal	crenwelge	02/12/2009 4:19 AM

Moderated by klhansen

Hop To

Link Copied to Clipboard