| |
Click on image for the lowdown. 
====
| | |
9 members (Jay R, 52Carl, 78buckshot, TooMany2count, walter74, Bill Hanlon, Barry Martak, Charles in CA, 1955 1 Series),
122
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,089 Posts1,056,417 Members48,443 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2005 Posts: 2,832 'Bolter | | 'Bolter Joined: Apr 2005 Posts: 2,832 | Are you using the factory steering box? If so, the box will need shimmed out to use anything but 55 or 56 265 V8 car left manifold. These are easy to find at swap meets and probably on ebay. The 265 manifold WILL clear but barely. I like to grind a 1/16" off the corner of the gear box right by the bolt head and a tad off the manifold so it has a full 1/8" clearance. The 265 manifold is a flat log type with a 2 bolt exhaust pipe flange that uses a flat gasket and is not something you want for big horsepower. Fine for everyday street driving.
Evan
| | |
|
|
| |
