Here are the photos. The 1" diameter LEDs set up for 12 volts. http://rides.webshots.com/photo/2111386740103315458EYeStp 1949 Studebaker light trimmed to fit AD fender With LEDs. http://rides.webshots.com/photo/2290152510103315458guWUtt The problem http://rides.webshots.com/photo/2923076470103315458zvLaom There is going to be a rubber gasket that will give me some room. The question is there any reason that I can't trim the tops of the LEDs some. It looks like there is about 3/16' before you get to the anode and cathode. The lights were less than $5 each. Here is what they look like on the truck. http://rides.webshots.com/photo/2805798000103315458MkPWWG Thanks

Neil
http://community.webshots.com/user/neilhatten