The Stovebolt Site Forums The Shop Area Engine Shop t-5 into a 49 1/2 ton

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

4 members (Woodcmiami, MRMEROTH11, Gray_Ghost, 1 invisible), 129 guests, and 2 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,121

Posts1,056,328

Members48,439

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: t-5 into a 49 1/2 ton fast57delivery #489721 01/04/2009 4:48 AM
Joined: Nov 2007 Posts: 39 Byhalia, M.S. R Rob-Roy 'Bolter
Rob-Roy 'Bolter R Joined: Nov 2007 Posts: 39 Byhalia, M.S.	A mid-eighties Astrovan with the four cylinder has the 9-1/8" disk with 1"x14 spline input. Thats the one that I plan to use for my T-5 conversion. 1938 HC half-ton - Buford 1954 Chevy 3600 2024 Chevy Colorado

Entire Thread
Subject	Posted By	Posted
t-5 into a 49 1/2 ton	fast57delivery	01/04/2009 3:21 AM
Re: t-5 into a 49 1/2 ton	Rob-Roy	01/04/2009 4:48 AM
Re: t-5 into a 49 1/2 ton	fast57delivery	01/04/2009 5:02 AM
Re: t-5 into a 49 1/2 ton	Rob-Roy	01/04/2009 5:09 AM
Re: t-5 into a 49 1/2 ton	6cylindersovertexas	01/04/2009 6:36 AM
Re: t-5 into a 49 1/2 ton	steppenwood	01/04/2009 8:12 AM
Re: t-5 into a 49 1/2 ton	Scott Danforth	01/04/2009 2:20 PM
Re: t-5 into a 49 1/2 ton	fast57delivery	01/04/2009 4:16 PM
Re: t-5 into a 49 1/2 ton	Scott Danforth	01/05/2009 12:28 AM
Re: t-5 into a 49 1/2 ton	Wrenchbender Ret.	01/05/2009 10:18 PM
Re: t-5 into a 49 1/2 ton	DadsApache	01/16/2009 11:41 PM
Re: t-5 into a 49 1/2 ton	Wrenchbender Ret.	01/17/2009 12:10 AM
Re: t-5 into a 49 1/2 ton	Scott Danforth	01/17/2009 1:17 AM
Re: t-5 into a 49 1/2 ton	bowtietim	01/17/2009 1:39 AM

Moderated by Phak1, Woogeroo

Hop To

Link Copied to Clipboard