Well, I figured out a way to make isolators for the torsion bar crossmember. I wandered thru the auto parts stores and found the aftermarket expandable freeze plugs. It was the correct diameter with a 3/16 hole in the center. I drilled that out to match the 1/2 diameter compression limiter from the old isolator and inserted a 1/2 wood dowel for a handle and cut it on the band saw to the same thickness as the old one. I was able to make 1 set of 2 isolators from one freeze plug which cost $2.99.
Last edited by olebessie62; 12/07/2008 3:04 AM.
