The Stovebolt Site Forums The Shop Area Engine Shop how much oil pressure with a drill?

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

6 members (WICruiser, 78buckshot, TUTS 59, Greg_H, GMCJammer51, treegrower), 140 guests, and 1 robot.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,105

Posts1,056,545

Members48,448

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: how much oil pressure with a drill? doc bob #478328 12/04/2008 4:43 PM
Joined: Mar 2005 Posts: 637 Sanger, Ca. C chevman32 Shop Shark
chevman32 Shop Shark C Joined: Mar 2005 Posts: 637 Sanger, Ca.	When using a drill to pressurize the engine you will get oil to all the passages if you run it long enough to get oil up to the rocker arms, then it will be ready to start with no oil starvation problems.

Entire Thread
Subject	Posted By	Posted
how much oil pressure with a drill?	davidn	11/30/2008 9:24 PM
Re: how much oil pressure with a drill?	OldSub	11/30/2008 10:28 PM
Re: how much oil pressure with a drill?	davidn	11/30/2008 10:47 PM
Re: how much oil pressure with a drill?	atomarc	11/30/2008 10:50 PM
Re: how much oil pressure with a drill?	davidn	11/30/2008 11:31 PM
Re: how much oil pressure with a drill?	truckernix	12/01/2008 1:40 AM
Re: how much oil pressure with a drill?	53moneypit	12/01/2008 1:47 AM
Re: how much oil pressure with a drill?	carolines truck	12/01/2008 3:47 AM
Re: how much oil pressure with a drill?	tclederman	12/01/2008 4:18 AM
Re: how much oil pressure with a drill?	OldSub	12/01/2008 7:10 AM
Re: how much oil pressure with a drill?	doc bob	12/02/2008 4:35 AM
Re: how much oil pressure with a drill?	chevman32	12/04/2008 4:43 PM
Re: how much oil pressure with a drill?	Project Helen	12/04/2008 5:24 PM

Moderated by Phak1, Woogeroo

Hop To

Link Copied to Clipboard