Stock is stock but this is a good thing !!! dance
i literally found a rear axle in a field one day while at work. all i wanted off that was the sway bar. so i rigged everything else to fit. I bought 2-3inch muffler type axle clamps and the bushings for the rear suspension bumpers, two long 3/8'' bolts and made the two tubes to separate the bumpers apart. total cost was $17.00. I'll have to buy the whole front kit and can't wait. they are a wonderful mod to ANY AD.
http://s67.photobucket.com/albums/h298/1951otter/?action=view&current=2748800-R1-045-21.jpg
http://s67.photobucket.com/albums/h298/1951otter/?action=view&current=2748800-R1-047-22.jpg
check cpp for them.
http://www.classicperform.com/4754chevtrk.html#Front%20Sway%20Bars
http://www.classicperform.com/4754chevtrk.html#Rear%20Sway%20Bars%20&%20Shocks

you can put them facing forward or backwards. you can mount them bottom or top.
Best on an AD to mount on top. bar must be parallel to ground w/ bolts in verticle position. aftermarket shock bumbers can be had at any good flaps/speed shop. mine are made by: http://www.energysuspension.com/
FYI, Dave... http://community.webshots.com/user/Fla54Chevy3100; loves both his ... he helped me w/ mine.
read: computer_punch
https://www.stovebolt.com/ubbthread...y&topic=0&Search=true#Post467096

Last edited by carolines truck; 11/02/2008 7:13 PM.
Jim & Caroline
The highway is for gamblers, better use your good sense."
Gooday-that's my 1¢ answer due to the lousy economy ~ cause I ain't got - no . mo . doe
Every Shaver | Now Can Snore | Six More Minutes | Than Before ... | Half A Pound for Half a Dollar | Spread On Thin | Above the Collar || BURMA-SHAVE