| |
Click on image for the lowdown. 
====
| | |
11 members (GMCJammer51, Steveoreno, 4tttt8, Jay R, Joe H, dt235sd, Peggy M, 55shaker, FAST55, 1955 1 Series, Waveski),
95
guests, and
5
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,180 Posts1,057,164 Members48,465 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Aug 2008 Posts: 403 Shop Shark | | Shop Shark Joined: Aug 2008 Posts: 403 | What is the easiest way to remove spotwelds on fender braces to fender. I need to replace them. I do not believe grinding on them will remove the weld with out damaging the fender that has to be welded back with a new brace. The fender metal is fairly thin on the over lap. Any ideas will be appreciated.
62Blue
Don
62Blue
62Chevy in progress
You've never been lost until you've been lost at Mach3" Paul F Crichmore (Test Pilot)
| | | |
Entire Thread
|  
removing spot welds on rear front fender braces
| Don G. | 10/19/2008 12:40 AM | |
|
|
| |
