| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,054 Posts1,055,782 Members48,426 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Aug 2002 Posts: 455 Shop Shark | | Shop Shark Joined: Aug 2002 Posts: 455 | Delta Cams in Tacoma will regrind your cam to any pattern for about $50, if it is still in OK shape.
Patrick's and Tom Langdon both sell Delta Cams.
I believe they have the best cam grind patterns available for our engines.
I have their 254 adv. duration grind in my 261 and am really happy with it.
You can call them and tell them what your plans are for your engine and how you will use it and they will set you up with the right cam.
Very helpful and knowledgeable folks there.
Heavier springs and push rods are really only required for more radical cam grinds with very high lift and long duration for high rpm engines.
In these engines the ZDDP level in your oil becomes a more critical factor than with stock/street motors.
| | |
|
|
| |
