| |
Click on image for the lowdown. 
====
| | |
1 members (Rusty Heaps),
114
guests, and
0
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,048 Posts1,055,540 Members48,425 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#44177 02/15/2002 12:44 AM | Joined: Dec 2001 Posts: 21 Member | | Member Joined: Dec 2001 Posts: 21 | Have a 64 chevy with a 283 3speed manual trans. Here's the deal. The clutch pivot broke at the pivot ball between the engine and the pivot. Original pivot bolt was mounted directly to engine and snapped off leaving the pivot dangling from the frame and push rods.
Trying to find replacement bolt and having some difficulty. Would like to get a new one as old ones may be fatigued and end up in same boat. Also see that some applications have a bracket mounted to engine and pivot bolt mounted to that bracket. Mine has male threaded shaft that goes into engine block.
Open for suggestions, kind of a show stopper not having a clutch that works...
64swb
| | |
|
|
| |
