| |
Click on image for the lowdown. 
====
| | |
3 members (klhansen, Steelonsteel, 1 invisible),
93
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,208 Posts1,057,443 Members48,471 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jul 2005 Posts: 2,031 Shop Shark | | Shop Shark Joined: Jul 2005 Posts: 2,031 | my filler neck also comes out of the bed but just below the wood, still in the bed exterior wall w/ a somewhat D or oval hole cut there. the filler neck you see in the photo is the very same one i took off the cab passenger side of my 51. i made a plate (very carefully) and drilled three holes (one hole is above the wood) to mount it to the bed outside wall. i cut off & welded the overflow hose up as well as welded the now 180 degree inverted filler to the plate i made. i added a 2'' piece to connect the gas hose to as well as the new tank. http://s67.photobucket.com/albums/h298/1951otter/?action=view¤t=DSC00309.jpghttp://s67.photobucket.com/albums/h...¤t=3100lockinghoodlatch-02.jpghttp://s67.photobucket.com/albums/h...¤t=3100lockinghoodlatch-05.jpg be sure you ground the tank & sender to a good frame &/or cab ground. 
Last edited by carolines truck; 06/28/2008 4:25 PM.
Jim & Caroline
The highway is for gamblers, better use your good sense."
Gooday-that's my 1¢ answer due to the lousy economy ~ cause I ain't got - no . mo . doe
Every Shaver | Now Can Snore | Six More Minutes | Than Before ... | Half A Pound for Half a Dollar | Spread On Thin | Above the Collar || BURMA-SHAVE
| | |
|
|
| |
