The Stovebolt Site Forums The Shop Area General Truck Talk How do I properly "specify" the Pitman arm spline?

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

6 members (Bill Hanlon, Bogart's Truck, TexasA&M48Truck, Donf, 2 invisible), 87 guests, and 2 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,131

Posts1,056,369

Members48,441

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: How do I properly "specify" the Pitman arm spline? ironhead68 #410356 05/06/2008 6:39 PM
Joined: Dec 2007 Posts: 198 Texas J JimGnitecki Wrench Fetcher
JimGnitecki Wrench Fetcher J Joined: Dec 2007 Posts: 198 Texas	Originally Posted by ironhead68 Output shaft on the Corvair is much Smaller than reg. Chev.Pitman arm will not work. Yes, that is correct. The output splined factory shaft is about 1 inch nominal diameter. The Flaming River one is a nominal 13/16 inch. Jim G http://s252.photobucket.com/albums/hh16/JimGnitecki/?special_track=nav_tab_album

Entire Thread
Subject	Posted By	Posted
How do I properly "specify" the Pitman arm spline?	JimGnitecki	05/03/2008 4:23 AM
Re: How do I properly "specify" the Pitman arm spline?	Grigg	05/03/2008 5:10 AM
Re: How do I properly "specify" the Pitman arm spline?	JimGnitecki	05/03/2008 1:19 PM
Re: How do I properly "specify" the Pitman arm spline?	waldo53	05/03/2008 7:14 PM
Re: How do I properly "specify" the Pitman arm spline?	6cylindersovertexas	05/03/2008 7:38 PM
Re: How do I properly "specify" the Pitman arm spline?	JimGnitecki	05/03/2008 9:35 PM
Re: How do I properly "specify" the Pitman arm spline?	don stocker	05/03/2008 10:35 PM
Re: How do I properly "specify" the Pitman arm spline?	Curt B.	05/04/2008 1:56 PM
Re: How do I properly "specify" the Pitman arm spline?	Grigg	05/04/2008 2:26 PM
Re: How do I properly "specify" the Pitman arm spline?	JimGnitecki	05/04/2008 3:02 PM
Re: How do I properly "specify" the Pitman arm spline?	Grigg	05/04/2008 5:05 PM
Re: How do I properly "specify" the Pitman arm spline?	JimGnitecki	05/05/2008 12:45 AM
Re: How do I properly "specify" the Pitman arm spline?	ironhead68	05/06/2008 4:09 PM
Re: How do I properly "specify" the Pitman arm spline?	JimGnitecki	05/06/2008 6:39 PM

Moderated by Gdads51

Hop To

Link Copied to Clipboard