| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,043 Posts1,055,540 Members48,425 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jan 2008 Posts: 38 'Bolter | | 'Bolter Joined: Jan 2008 Posts: 38 | Mechanically challenged but giving it a try -
I tried the search but I don't think I know what the proper terminology is. When I try to turn the engine by hand it is very stiff (it will turn though). I also noticed that the back two small cylinders under the push rods (hydraulic lifters?) were stuck. I've loosened those but it is still hard to turn. I cleaned and vacuumed the cylinders and the inside looks pretty good. Will I have to tear this all apart to get at the problem? What kinds of things make it stiff?
-Phil
| | |
|
|
| |
