4 ton front end parts

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

7 members (Goach2, Dave1234, IHPWR, Hotrod Lincoln, TUTS 59, Peggy M, 1 invisible), 73 guests, and 4 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,206

Posts1,057,440

Members48,471

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: mix matching 1/2 ton and 3/4 ton front end parts OldSub #387098 03/12/2008 1:31 PM
Joined: Aug 2007 Posts: 610 Wapwallopen Pa D drummin52 Shop Shark
drummin52 Shop Shark D Joined: Aug 2007 Posts: 610 Wapwallopen Pa	then it has to be a 5 x 4.75 lug pattern, thats good, then it will match the disc brake kit which is a 5 x 4.75 lug pattern as well. Better than having 5 lugs in the rear and 8 in the front. Thanks!!!

Entire Thread
Subject	Posted By	Posted
mix matching 1/2 ton and 3/4 ton front end parts	drummin52	03/11/2008 3:29 AM
Re: mix matching 1/2 ton and 3/4 ton front end parts	ironhead68	03/11/2008 4:24 PM
Re: mix matching 1/2 ton and 3/4 ton front end parts	drummin52	03/11/2008 11:40 PM
Re: mix matching 1/2 ton and 3/4 ton front end parts	OldSub	03/12/2008 6:11 AM
Re: mix matching 1/2 ton and 3/4 ton front end parts	drummin52	03/12/2008 1:31 PM
Re: mix matching 1/2 ton and 3/4 ton front end parts	10 micron	03/12/2008 1:52 PM
Re: mix matching 1/2 ton and 3/4 ton front end parts	drummin52	03/12/2008 2:13 PM
Re: mix matching 1/2 ton and 3/4 ton front end parts	azchevy	03/13/2008 10:07 PM
Re: mix matching 1/2 ton and 3/4 ton front end parts	OldSub	03/14/2008 2:12 AM
Re: mix matching 1/2 ton and 3/4 ton front end parts	azchevy	03/25/2008 6:35 PM

Moderated by Gdads51

Hop To

Link Copied to Clipboard