Hy Czechman, Grigg, and guys, the tires are 255/85R16 on F@#d wheels that clear the tie rod ends without modification or spacers, this truck had the non-rebuildable tie rod ends when he got it and no problems, they are as tall or maybe a little taller than the stock 17" wheels/tires. he removed the hub cap clips from the stock wheels and bolted them, with a spacer to the F@#d wheels and the caps fit perfectly, you can just barely see the edges of the dimples to retain the F@#d hubcaps. The small aluminum box on the right rear corner is something he had made up to hold his propane bottle for his camper, I don't seem to have a key to open the tool boxes right now, but as soon as I do I'll take an interior shot of them for you, there were no labels or plates on them, and no little holes indicating that there were some at one point, hope that helps. P.S. Thank you Cletis for putting the pictures in an acceptable format, I'm a mechanic and not confusilator savy at all, but I am trainable, er at least I used to be, thanks again.
