| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,031 Posts1,055,435 Members48,422 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2005 Posts: 2,832 'Bolter | | 'Bolter Joined: Apr 2005 Posts: 2,832 | Engines tend to stop at nearly the same place as far as starter drive to flywheel is concerned so try turning the engine about 90 degrees and then trying it. If it kicks in every time by doing this then it's the flywheel. If a standard trans you can put it in high gear and push it a little forward or back and if an auto you will have to turn the flywheel, after pulling dust cover, or if it has a bolt in the front of the crank you can turn with that. If it's an old 235 or even a 250 you can press the fan belt tight and turn them by pulling on a fan blade.
Evan
| | |
|
|
| |
