The Stovebolt Site Forums The Shop Area Engine Shop 216 bent rod and stuck valve

Help is a click away!

VEHICLE
INFORMATION
KITS

at the

GM Heritage Center
All the details are here.

Searching the Site - a click away

New here ??? Where to start?

Click on image for the lowdown.

====

Who's Online Now

0 members (), 90 guests, and 1 robot.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums66

Topics128,127

Posts1,056,680

Members48,452

Most Online14,466
Apr 26th, 2026

Step-by-step instructions for pictures in the forums

Brad Allen's photos

AD Chevy Trucks

Pictures galore

Over 6,000 pictures

Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips.

Check them out!

Lots of work on Brad's part ... pure enjoyment (and references) for you!

Big Thanks!

THANKS!

For helping keep this great
old truck web site
on the Internet for

over 30 years!

and not clogged down
with Ads!

Again, thanks!

Print Thread

Re: 216 bent rod and stuck valve Joe McNeel #373637 02/11/2008 2:35 AM
Joined: Apr 2000 Posts: 179 Elmo, UT, USA J Joe McNeel Shop Shark
Joe McNeel Shop Shark J Joined: Apr 2000 Posts: 179 Elmo, UT, USA	Note: check all the valves while the rocker shaft is off. If mine was any indication, several will be gummy even though only one bent a push rod. Joe McNeel http://mcneelnet.com/~jmcneel/59.html

Entire Thread
Subject	Posted By	Posted
216 bent rod and stuck valve	butch iowa	02/09/2008 3:52 PM
Re: 216 bent rod and stuck valve	Tiny	02/09/2008 4:19 PM
Re: 216 bent rod and stuck valve	butch iowa	02/09/2008 4:24 PM
Re: 216 bent rod and stuck valve	Tiny	02/09/2008 9:38 PM
Re: 216 bent rod and stuck valve	butch iowa	02/10/2008 8:24 PM
Re: 216 bent rod and stuck valve	Tiny	02/10/2008 9:25 PM
Re: 216 bent rod and stuck valve	48bigtrucks	02/11/2008 12:52 AM
Re: 216 bent rod and stuck valve	Joe McNeel	02/11/2008 2:29 AM
Re: 216 bent rod and stuck valve	Joe McNeel	02/11/2008 2:35 AM
Re: 216 bent rod and stuck valve	Czechman	02/11/2008 3:11 AM
Re: 216 bent rod and stuck valve	Joe McNeel	02/11/2008 3:13 AM
Re: 216 bent rod and stuck valve	butch iowa	02/11/2008 4:11 PM
Re: 216 bent rod and stuck valve	48bigtrucks	02/12/2008 2:40 AM

Moderated by Phak1, Woogeroo

Hop To

Link Copied to Clipboard