| |
Click on image for the lowdown. 
====
| | |
1 members (SandraD),
56
guests, and
5
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,021 Posts1,055,355 Members48,420 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jul 2007 Posts: 293 Wrench Fetcher | | Wrench Fetcher Joined: Jul 2007 Posts: 293 | Wood - I'm not entirely sure I understand your question, but I'll give it a try...
The original angle strips on the inside of the bed are spot welded to the bedsides. There is a spot weld about every 6-inches the entire length of the bed. These welds often appear as a slight dimple from the exterior. When I replaced my bed boards and angle strips, I had to drill out the spot welds to remove the angle strips. Some folks choose to replace the angle strips and BOLT the stips to the bedsides. Others, weld the strips to the bedsides just like the originals. | | |
|
|
| |
