Hello Bolters,

I am wondering if the way i'm going about painting my 65 is the proper way?
step1 removed all panels.
step2 stripped down to bare metal.
step3 cleaned and sanded all sides of the panels.
step4 cleaned with metal prep.
step5 Primed with self etching primer.
step6 lined up all panels on the truck.
step7 repaired all dents and dings.
step8 primed all areas that were worked.
step9 removed all panels and paint with finish color. (2 coats)
step10 instaled all panels and shoot one last coat of finish color.
step11 shoot 3 coats of clear.

I hope I have all the step on order. I should mention that I do not have the box on for this. I am doing that on jack stands.

Thanks eh!
Matt Jackson