| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,092 Posts1,056,040 Members48,433 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Mar 2006 Posts: 97 Wrench Fetcher | | Wrench Fetcher Joined: Mar 2006 Posts: 97 | I have a 63 and am considering going to a mustang two front. I just recently re-did all the steering components, as well as other things. Here is the full run down:
Upper and lower control arms with New upper / Lower ball joints
Drag link with New inner and outer tie rod ends
Power steering box
3" Drop spindles
5 lug disk brake setup from a later truck (5x5 pattern)
I did not replace the pitman arm nor the actual control arm bushings/shafts.
What do you think all that is worth?
1963 Chevy P/U: Forged LS1/4L80E swap and big hit of N20 coming
1973 Camaro: Low compression solid roller LS1 with PT91 turbo Built for the Silver State classic
1967 Convert Continental: Stock Cruiser
| | |
|
|
| |
