| |
Click on image for the lowdown. 
====
| | |
0 members (),
62
guests, and
7
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,021 Posts1,055,355 Members48,420 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Aug 2007 Posts: 17 Apprentice | | Apprentice Joined: Aug 2007 Posts: 17 | Help! Just put a 87 Suburban crossmenber and suspension in a 64 C-10. I used a Brothers Truck mounting kit to install the 87 p/s steering box, this was necessary to allow for the absence of an indentation in the frame of the 64 that is stamped in the 87 frame. Now I am at a loss at to how to properly align the pitman arm to the centerlink due to the approximately 3/4 inch offset to the drivers side created by the thickness of the Brothers kit, anyone having the answer will be a hero. Thanks Jim | | | |
Entire Thread
|  
Pitman Arm Interchange
| PBO | 01/08/2008 10:24 PM | |
|
|
| |
