| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,162 Posts1,056,950 Members48,458 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jan 2007 Posts: 93 Wrench Fetcher | | Wrench Fetcher Joined: Jan 2007 Posts: 93 | There is a write-up going the other way on this site:
gmcguy.org
The write up is for folks with 3 speeds that want to convert to 4 speeds. I would think the procedure for your conversion would be similar. There are 2 pieces that need to be changed to get to a small hump rather than just one. The section welded at the front of th removable pan is also different.
I hope this is helpful.
Regards
Steve
New Orleans | | |
|
|
| |
