| |
Click on image for the lowdown. 
====
| | |
12 members (Joe H, Gray_Ghost, Woodcmiami, fonz8261, 2-Ton, cmayna, 55shaker, kades51, Forty9, NorthCoast3800, Robert Crandall, 1 invisible),
103
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,169 Posts1,057,037 Members48,458 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2005 Posts: 275 Shop Shark | | Shop Shark Joined: Apr 2005 Posts: 275 | Woody - short answer, you can't. You can take off the side cover, everything can look OK there, then you finally take it completely apart & ONLY then can you see the most expensive parts to replace, namely the input & main (output) shafts where they meet with the roller bearing.Here is a pic of a bad one http://pic80.picturetrail.com/VOL953/3900683/18661857/295676483.jpg Doug
Last edited by desertdog; 01/02/2008 3:49 PM. Reason: still learning
| | |
|
|
| |
