| |
Click on image for the lowdown. 
====
| | |
8 members (Otto Skorzeny, Shaffer's1950, Hotrod Lincoln, FAST55, fonz8261, Guitplayer, 46 Texaco, 1 invisible),
69
guests, and
3
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,139 Posts1,056,451 Members48,441 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Jan 2007 Posts: 202 Wrench Fetcher | | Wrench Fetcher Joined: Jan 2007 Posts: 202 | As for gears ratio I would use 3.42 or 3.54/3.55s. Thats the lowest ratio I would go with no overdrive and with 30 inch tires. I knew someone that used 3.40/3.42s with their 235 and loved it. Saved a bunch of gas. Its the ratio I would choose unless I was going to do some towing. It can go down the road at hwy speeds without screaming. Their truck used to have 4.11s which was too low. They had no overdrive either. With 32 or 33's you can use 3.55/3.73 gears. I am not sure about the trans but I believe it will work for you. Bell housing may be different but should interchange with no problems. Someone else here I am sure will know on that. Henry
Last edited by Henry G; 11/26/2007 1:42 AM.
| | |
|
|
| |
