| |
Click on image for the lowdown. 
====
| | |
0 members (),
40
guests, and
2
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums66 Topics128,030 Posts1,055,428 Members48,422 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | | | Joined: Apr 2005 Posts: 261 Wrench Fetcher | | Wrench Fetcher Joined: Apr 2005 Posts: 261 | They are usually spot welded (Resistance welded). You can get spot weld tools for drilling from a good auto body shop supplier. You only want drill out the angle bed side rail metal, don't drill throught the bed side. Spot welds can be found by looking for the little depressed dimple in the angle side rail. on reassembly you can either use a resistance spot welder or use a MIG welder (you will have to drill holes in the angle rail to use the MIG welder; usually about 5/16 in. hole and use 0.023 in. wire.
34 & 35 trucks are the greatest
| | |
|
|
| |
