I've solved most of my oil leak problems except the timing cover seal, which is scheduled to happen in a couple of weeks. I've found that if I putt to work and stay off the highway I go thru about a qt every 4-5 days, but if I run down the highway oil consumption is MUCH faster. Anyway, yesterday I was almost a qt low and was going to top off when I got homew from work. Much to my suprise, I was overfull. My valves had been clattering a lot more on the way home and surnuff, oil has gas in it. I've pulled the old fuel pump(glass topped A/C) and am installing the standard pump off my old 235. This looks like a standard pump with a brass colored flat top that has the inlet and outlet ports upright from the flat top. The old fuel lines did not line up with the new pump. I removed the line fittings and put a
3/4 wrench where the line fittings screw in and rotated the top of the pump about 1/3 of a turn.Now everything lines up. After thinking about this I'm wondering if that was the correct thing to do and if I could have damaged the new pump? I won't have it back together till Sat. morning, so I have to wait and see. I haven't been to the vendors yet, but I know that you used to be able to rebuild the old pumps. I'd like to repair the glass topped one for future use. I don't recall seeing any kits listed. Anybody ever done this and have I screwed up my new pump?
