| |
Click on image for the lowdown. 
====
| | | Forums66 Topics128,020 Posts1,055,345 Members48,420 | | Most Online14,466
Apr 26th, 2026 | | AD Chevy Trucks  Over 6,000 pictures Brad Allen has an awesome collection of Chevrolet factory pictures that he has set up from film strips. Check them out!
Lots of work on Brad's part ... pure enjoyment (and references) for you!
| | THANKS!
For helping keep this great
old truck web site
on the Internet for over 30 years! and not clogged down
with Ads!  Again, thanks!
| | 
#26761 01/14/2002 3:07 AM | Joined: Dec 2001 Posts: 1,248 'Bolter | | 'Bolter Joined: Dec 2001 Posts: 1,248 | You'll need to remove the pressure plate first, you'll have to rotate engine to get to all bolts. After you have removed it , then you will have to straighten the corners of the clip on the six bolts in center of flywheel. Then you can remove them. You may need a way to hold engine from turning over while doing this. Fly wheel can be removed then. Recommend you mark pressure plate and flywheel to make sure you retain balance on reassembly.  | | |
|
|
| |
